Contour On-Desk Power Module

Contour DPG-Formfitting

Contour On-Desk Power Module

The Contour is a stylish plastic or aluminium on-desk power/data/AV module. It has a modern curved appearance displaying many design features, with the added benefit of different mounting options.

The Contour is functional yet non-intrusive to the working desk.

Features:
• Fully segregated power and data/AV
• Customisable to meet your specifications, with a choice of power & data outlets.
• Supplied with a 1000mm lead with a male soft-wired coupler. A 10amp 3 core flex with 3-pin plug (2000mm), can be supplied upon request.
• Fixing via C-clamps, adhesive fixing kit, function wall fixing via cams or bolt-through on work surface. Sold separately.

• Assembled in Australia and is a fully customisable product

• The body is made from either flame-retardant ABS plastic or anodized aluminium
• Fully segregated power, voice and data
• Choice of power & data connectors to meet most specifications
• Supplied with a 1000mm lead with a male soft-wired coupler. A 10amp 3-core flex (2000mm) with a 3-pin plug can be supplied upon request.

• Complies with the requirements 0f AS/NZS3000 & AS/NZ61535:2011

Dimensions:
• 60mm deep x 81mm high
• Please speak to our sales team for lengths as they vary per configuration

Fixing:
• We recommend using two C-clamps for the Contour module, which fits a desk thickness between 20mm-32mm. Sold separately.
• We recommend using one adhesive kit for the Contour module. The adhesive strips have been rigorously tested to ensure that they work on a variety of surfaces. Please check with furniture provider as to the suitability of the surface finish, Sold separately

Colours:
• Black, white or grey.
• Other colours are available upon request and subject to minimum order quantity.

Material:
• Flame-retardant ABS plastic or anodized aluminium

Outlets:
• 10amp auto-switched flush mount sockets
• Range of International sockets available by request

Outlets available:
• HDMI
• USB 3.0
• Cat6 RJ45
• VGA
• RCA & Audio
• USB

Leads:
• 20amp 3-core flex with male coupler, supplied standard in 1m length
• 10amp 3-core flex with a 3-pin plug, supplied standard in 2m length
• Thermal overload is needed when three or more sockets are used.

Fixings:
• Several fixing options are available, including C-Clamps, Adhesive Fixing Kits, Slat wall mount & bolt through fixing, all sold separately

This product is custom built, and the codes shown below are only an example. Speak to our team to discuss what you need in your Contour(s)

Product Ref.ColoursDescription
87AP02Black, white or grey2 auto-switched 10amp sockets with 1m cable with male coupler
87AP04Black, white or grey4 auto-switched 10amp sockets with 1m cable with male coupler
87AU02/10ABlack, white or grey2 auto-switched 10amp sockets, with 2m flex & 3-pin plug and provision for 2 data
84AU02Black, white or grey2 auto-switched 10amp sockets with 1m cable with male coupler and provision for 2 data
87AU04Black, white or grey4 auto-switched 10amp sockets with 1m cable with male coupler and provision for 4 data
87AU042Black, white or grey4 auto-switched 10amp sockets with 1m cable with male coupler and provision for 2 data
87AU042/10ABlack, white or grey4 auto-switched 10amp sockets, with 2m flex & 3-pin plug and provision for 2 data

Fixing Kits

Product Ref. No.DescriptionUses
FDR-001.WT/SLC-clamp white or silverWe recommend using 2 x C-clamps for the CONTOUR module Fit desk thickness of 20-32mm – to tighten the clamp use thumb wheel fitted.
440006AdhesiveWe recommend using 1 adhesive kit for the CONTOUR module The adhesive strips have been rigorously tested to ensure that they work on a variety of surfaces. Please check furniture provider as to the suitability of the surface finish.