Freedom On-Desk Power Module

Freedom Power Module White DPG-Formfittings

Freedom On-Desk Power Module

The Freedom power module offers the versatility of different mounting options: besides on the desk, bracketing is available for under desk, vertical and panel mounting.

The Freedom is configurable with segregated power & data/AV choices to suit different workstation requirements and can be fitted to the edge of the desk with C-clamps or adhesive kits, making it functional yet non-intrusive to the working desk.

Features:

• Anodised aluminium extruded body
• Customisable to your needs – go small or go big
• Fully segregated power & data/AV
• Supplied with a 1000mm male soft wiring connector.  Can be wired with a 10amp flex lead and 3-pin plug upon request.
• Choice of power & data connectors to most specifications
• Accepts enhanced Category 6 RJ45 data outlets
• Variety of fixing options available (sold separately).

Assembled in Australia and is fully customisable.

Material:
• Anodised aluminium extruded body

Leads:
• Supplied with a 1000mm male soft wiring connector
• Can be wired with a 10amp flex lead and 3-pin plug upon request.
• White and grey modules are supplied with white cables, and black modules are supplied with black cables.

Sockets:
• Choice of power & data/AV connectors to most specifications
• Accept Category 6 RJ45

Dimensions:
• With standard desk mount brackets: 75mm deep x 75mm high,
• Please speak to our sales team for lengths, as they vary depending on the configuration

Fixing:
• We recommend using two C-clamps for the Freedom module, which fits a desk thickness of 20mm-32mm, or adhesive kits.
• We recommend using one adhesive kit for the Freedom module. The adhesive strips have been rigorously tested to ensure that they work on a variety of surfaces. Please check with the furniture provider as to the suitability of the surface finish.

Compliance:
• Fully segregated power & data/AV
• Complies with the requirements Of AS/NZS3000 & AS/NZ61535:2011
• dpg-formfittings cannot accept any responsibility or liability for providing category 5e performance in products supplied. We will however, fit category 5e specification components where specified

Colours:
• Fascias/end caps available in black, grey or white
• Inner end caps available in black, white, grey, lime green, orange or cyan.
• White and grey modules are supplied with white cables and black modules are supplied with black cables.

Outlets:
• 10amp auto-switched flush mount sockets
• Range of International outlets are available by request

Outlets available:
• HDMI
• USB 3.0
• Cat6 RJ45
• VGA
• RCA & Audio
• USB Charging Leads

Leads:
• Supplied with a 1000mm male soft wiring connector
• Can be wired with a 10amp flex lead and 3-pin plug upon request.

Fixings:
• C-clamps or
• Adhesive Kits
• L-Fixing

 

Please Note: This product is custom built, and the codes shown are only an example. Speak to our team to discuss what you need in your Freedom.

Product Ref.DescriptionFixing Kits Required
(not included)
760AP044 auto-switched 10amp sockets with 500mm lead with male coupler2 x C-clamps or 2 x Adhesive Kits
760AU022 auto-switched 10amp sockets with 500mm lead with male coupler and provision for 2 data2 x C-clamps or 2 x Adhesive Kits
760AU044 auto-switched 10amp sockets with 500mm lead with male coupler and provision for 4 data2 x C-clamps or 2 x Adhesive Kits
760AU042/10A4 auto-switched socket outlets, thermal overload with 2m flex and 3 pin plug and provision for 2 data2 x C-clamps or 2 x Adhesive Kits
760AP04USB4 auto-switched socket outlets, dual USB charger c/w 2mtr 10amp cable and thermal overload2 x C-clamps or 2 x Adhesive Kits

Fixing Kits

Product Ref.Description
FDR-001.WT/SLC-clamp, white or silver
Fits desk thickness of 20-32mm – to tighten the clamp, use thumb wheel fitted
44006Adhesive Fixing Kit
440004L-fixing
440004Reverse L-fixing