Harmony II On-Desk Power Module

Harmony II On-Desk Power Module

The Harmony II on-desk module has had a facelift to improve its appearance. A new double-end cap now means that there are no visible screws, creating a flawless look.

The Harmony II can be fitted to the edge of the desk with C-clamps or adhesive kits, making it functional yet non-intrusive to the working desk.

Features:

• Anodised aluminium extruded body
• Completely customisable to each user’s specifications, with a wide range of data and AV components available
• Configured with segregated power & data/AV choices
• Inclusion of rear access data sockets
• Match the colour to your office’s personality. See the ‘Options’ tab for the variety of colours available.
• Supplied with a 1000mm soft-wired male connector, however, can be wired with a 10amp flex lead and 3-pin plug upon request.

 

• Anodised, aluminium extruded body
• Assembled in Australia

Dimensions:
• Variable (l) x 80mm(W) x 80mm(h)
• Please speak to our sales team for the length as they vary with each configurations

Power/Sockets:
• Segregated power & data/AV options to fully customise your Harmony II.
• Rear access data sockets
• Accepts Category 6 data

Leads
• Supplied with a 1000mm male soft-wired connector however can be wired with a 10amp flex lead and 3-pin plug upon request.
• If 3 or more sockets are required, a thermal overload must be included
• White and grey modules are supplied with white cables and black modules are supplied with black cables.

Compliance:
• Complies with the requirements of AS/NZS3000 & AS/NZ61535:2011
• dpg-formfittings cannot accept any responsibility or liability for providing CAT 6e performance in products supplied. We will, however, fit category 6e specification components where specified

Colours
• Fascias/end caps available in black, grey or white
• Inner end caps available in black, white, grey, lime green, orange or cyan.

Outlets
• 10amp auto-switched flush mount sockets
• Range of International sockets available by request

Outlets available:
• HDMI
• USB 3.0
• Cat6 RJ45
• VGA
• RCA & Audio
• USB Charging

Leads
• Supplied with a 1000mm male soft wiring connector
• Can be wired with a 10amp flex lead and 3-pin plug upon request
• Thermal overload is needed when three or more sockets are used

Fixings
• Fixing via standard C-clamps or adhesive fixing kit

Please Note: This product is custom built, and the codes shown are only an example. Speak to our team to discuss what you need in your Harmony II

Product Ref.DescriptionFixing Kits Required
(Not included)
84.2AP022 auto-switched 10amp sockets and 1m lead with male coupler1x C-clamp / 1x Adhesive
84.2AP044 auto-switched 10amp sockets and 1m lead with male coupler2x C-clamp / 1x Adhesive
84.2AU022 auto-switched 10amp sockets, with 1m lead with male coupler and provision for 2 data2x C-clamp / 1x Adhesive
84.2AU044 auto-switched 10amp sockets, with 1m lead with male coupler and provision for 4 data2x C-clamp / 1x Adhesive
84.AP04/10A4 auto-switched 10amp sockets, with 2m 3-pin plug lead and thermal overload2x C-clamp / 1x Adhesive
84.2AP02USB/10A2 auto-switched 10amp sockets, 4amp dual USB charger and 2m lead & 3-pin plug2x C-clamp / 1x Adhesive
Product Ref. Description
FDR-001.WT/SLC-clamp, white or silver
Fit desk thickness of 20-32mm – to tighten the clamp use thumb wheel fitted.
440006Adhesive Fixing Kit. The adhesive strips have been rigorously tested to ensure that they work on a variety of surfaces. Please check furniture provider as to the suitability of the surface finish