Power Master Module

One of our best sellers!  The Power Master modules come in dual or quad auto-switched 10amp socket outlets.

Features:

• 20 amp rated coupler connection system
• Slimline modules for under desk, duct or screen mounting
• Tool-less mounting into sheet metal or aluminium up to 2mm thick
• Can be mounted in/on duct lid, in beam, basket, din rail or screen
• Modules can plug together to allow combinations of 6 or 8 gang (must be stated at the time of ordering as this is not user configurable)
• Comes in a variety of colours

 

• 20 amp rated coupler connection system
• Fitted with non-removable integral retention clips
• Tool-less mounting into sheet metal or aluminium up to 2mm thick
• Screen tile frame available for panel thickness between 6-14mm (no tools required to fit)
• Can also be joined to make 6 or 8 outlets
• Complies with AS/NZ61535.1 standards

Number of sockets:
• Dual or quad
• Combinations of 6 or 8 sockets (in one module) can be assembled by our warehouse (non-customer configurable); or modules can be plugged together using one of our connector leads

Colours:
Black, white, silver or red

Frame:
Screen tile frame available for panel thickness between 6-14mm (no tools required to fit)

Product Ref.ColoursDescription
PM02.BK/WT/SL/RDBlack, white, silver or redPower Master dual auto switched 10 amp socket outlet
PM04.BK/WT/SL/RDBlack, white, silver or redPower Master quad auto switched 10 amp socket outlet
PM06.BK/WT/SL/RDBlack, white, silver or redPower Master quad and dual auto switched 10amp socket module soft wired, plugged together*
PM08.BK/WT/SL/RDBlack, white, silver or redPower Master quad and quad auto switched 10amp socket module soft wired, plugged together*
FRAME02.BK/WT/SLBlack, white or silverThick Tile Frame for fitting the PM02 into a screen tile system, with a thickness between 6mm and 14mm
FRAME04.BK/WT/SLBlack, white or silverThick Tile Frame for fitting the PM04 into a screen tile system, with a thickness between 6mm and 14mm

* Please Note: PM06 and PM08 units need to be supported by either placing them in a metal plate under the workstation or with several cable ties to a cable tray

Under-desk Metal Mounting Plates (Horizontal)
Under-desk Metal Mounting Plates (Vertical)
Under-desk Metal Mounting Plates (Angled)