Type Z On-Desk Power Module

Type Z On-Desk Power Module

The Type Z on-desk power module is our latest low-profile extrusion. This module has a double-end cap which means that there are no visible screws, creating an overall flawless look.

With an array of segregated power and data/AV choices, paired with one of our fixing options, this unit is functional yet non-intrusive and will meet your workstation requirements.

Features:
• Anodised aluminium extruded body
• Newly designed end caps with no visible screws
• The inclusion of rear access data sockets
• Assembled in Australia and customisable to user’s specifications, with USB chargers and a wide range of data and AV components available
• Accepts enhanced Category 6 RJ45 data outlets
• Supplied with a 1000mm lead with soft-wired male coupler, however, can be wired with a 2m flex and 3-pin plug upon request
• Fixing via standard C-clamps or adhesive fixing kit (sold separately).

Assembled in Australia and is fully customisable

Material:
• Anodised aluminium extruded body

Sockets:
• Rear access data sockets
• Segregated power & data/AV options to fully customise your Type Z
• Accepts enhanced Category 6 RJ45 data outlets

Leads
• Supplied standard with a 1000mm soft-wired male connector, however can be wired with a 10amp flex lead and 3-pin plug upon request
• If three or more sockets are required when using a lead with 3-pin plug, a thermal overload must be incorporated

Fixing:
• We recommend using two C-clamps for the Type Z module, which fits a desk thickness of 20mm-32mm.
• We recommend using one adhesive kit for the Type Z module. The adhesive strips have been rigorously tested to ensure that they work on a variety of surfaces. Please check with furniture provider as to the suitability of the surface finish.

Compliance
• Complies with the requirements of AS/NZS3000 & AS/NZ61535:2011
• dpg-formfittings cannot accept any responsibility or liability for CAT 6 performance in products supplied. We will, however, fit CAT 6e specification components where specified

Dimensions:
x*(l) x 62mm(w) x 65mm(h)
• Please speak to our sales team for the length, as it will vary according to configuration

Colours:
• Fascias/end caps available in black, grey and white
• Sockets available in white, black, grey

Leads:
• 1000mm 20amp 3-core flex with male coupler, white or black; or
• 2000mm 10amp 3-core flex with 3-pin plug, white, black or grey
• Other lengths available by request
• If three or more sockets are required when using a lead with 3-pin plug, a thermal overload must be incorporated

Outlets
• 10amp auto-switched flush mount
• Range of international sockets available
• Speak to our team to discuss your specific configuration needs of power and data/AV needs

Outlets available:
• HDMI
• USB 3.0
• Cat6 RJ45
• VGA
• RCA & Audio
• USB Charging

Fixings:
• Fixing via standard C-clamps or adhesive fixing kit

Product Ref.DescriptionFixing Kits Required (not included)
88AU02USB.WTType Z desk module extrusion c/w 2 auto-switched socket outlets, 500mm 20A flex and dual USB 4A charger, with provision for 2 data, white2x C-Clamp 2 or 1x Adhesive
88AP042.WTType Z desk module extrusion c/w 4 auto-switched socket outlets, 500mm 20A flex and provision for 2 data, white2x C-Clamp 2 or 1x Adhesive
88AU042USB.WTType Z desk module extrusion c/w 4 auto-switched socket outlets, 500mm 20A flex and dual USB 4A charger, with provision for 2 data, white2x C-Clamp 2 or 1x Adhesive
88AP02USB.WTType Z desk module extrusion c/w 2 auto-switched socket outlets, 500mm 20A flex and dual USB 4A charger, white2x C-Clamp 2 or 1x Adhesive
Product Ref.Description

FDR-001.WT

C-clamp – Fits desk thickness of 20-32mm – to tighten the clamp use thumb wheel fitted, white.

FDR-001

C-clamp – Fits desk thickness of 20-32mm – to tighten the clamp use thumb wheel fitted, silver.

440006Adhesive Fixing Kit – The adhesive strips have been rigorously tested to ensure that they work on a variety of surfaces.
Please check furniture provider as to the suitability of the surface finish.